switch settings for a Mistubishi MR535-U00 ???

From: John Foust <jfoust_at_threedee.com>
Date: Tue Jan 2 13:44:14 2001

At 11:00 PM 1/1/01 -0700, Richard Erlacher wrote:
>I've got a couple of these that I'd like to press into service, as they're
>the right size and shape. Can somebody tell me what the switches do?

Boy, I must be getting old if I can supply answers like this.
I had a pair of them in a 386/20 ten-plus years ago. I have
a poorly faxed spec sheet: drive type 17, SW1 is termination
(leave open (off) if installed as a second drive), and
SW2 is the drive selection. They're not binary, they're
sequential, so shorting the first pair makes it drive 1,
only the second pair makes it drive 2, etc. In the same
folder, I have the spec sheets for the WD RLL controller,
if you need those. I can't quite read what the rightmost
four on SW2 do, but it gives me the impression they stay
"off" or at whatever config they ship with.

- John
Received on Tue Jan 02 2001 - 13:44:14 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:46 BST