Apple Floppy Controller schematic - anyone?

From: Richard Erlacher <edick_at_idcomm.com>
Date: Tue Jan 23 14:15:34 2001

The schematic of the Apple controller is in the Apple DOS manual, but it may
not be of much help, as it requires a prom , the content of which isn't in
the schematic. You might check wiht Eric Smith, as I would easily believe
that he might have such information. The Apple controller, PROM and all
would, by the way, EASILY fit in a CPLD/FPGA, which might save no little
wiring, etc.

If you can't get this schematic anywhere else, let me know and I'll make and
send you a scan.

Dick
----- Original Message -----
From: "Philip Pemberton" <philpem_at_btinternet.com>
To: <classiccmp_at_classiccmp.org>
Sent: Tuesday, January 23, 2001 12:50 PM
Subject: Apple Floppy Controller schematic - anyone?


> Hi,
> I'm currently designing and building a 6502-based computer system for
my
> own use. Right now, everything is done. Except the damn floppy controller.
I
> read about the Apple floppy controller on the 'net (woz.org) and I would
> like to get hold of some schematics. Anyone got any idea where I could get
> these? Better yet, anyone mind scanning and e-mailing me it?
>
> Thanks.
> --
> Phil.
> http://www.philpem.f9.co.uk/
> philpem_at_bigfoot.com
> PGP Key Fingerprint:
> 1FA6 6C7F A2FD BB15 84BF
> 4993 2B27 0628 E54E 33B1
>
>
Received on Tue Jan 23 2001 - 14:15:34 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:48 BST