Osborne One -- No video.

From: Rich Beaudry <r_beaudry_at_hotmail.com>
Date: Tue Jul 17 07:59:10 2001

Hello all,

To answer the replies so far....

1) There is a small black connector labeled "Do no remove when power is on"
or something to that effect. I does indeed cover a card-edge style
connector. I did remove it, power OFF, and I didn't recall it had anything
conductive inside. It just looked like a plastic plug. I'll have to look
again, when I go home this evening...

2) I did try the composite video output. Nothing there, either.

3) As I stated before, there was no light from the CRT at all, after taking
the cover off and powering up. I will perform the ohmmeter test suggested
by Dave McGuire tonight.

- As for the composite video connector... Does anyone know if there is any
magic keystroke or other setting to enable this? Perhaps if the internal
monitor is dead, I can still use an external one...
Received on Tue Jul 17 2001 - 07:59:10 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:52 BST