Vaxstation 3100 M38

From: jkunz_at_unixag-kl.fh-kl.de <(jkunz_at_unixag-kl.fh-kl.de)>
Date: Wed Jul 25 06:40:11 2001

On 25 Jul, Bill Pechter wrote:

> I get the following errors at power up test:
>
> F...E...D...C...B...A...9...8...7...6...6...4...3_..2_..1...
>
> I know the 3_ 2_ means not tested... any info on the following minor
> errors...
On http://www.bsdfans.org/ is a description of the Startup-messages of
a VAXstation 3100.

> ?E 0040 0000.0005
> ?B 0010 0020.0081
> ?6 80A1 0000.4001
> ?4 00D0 0007.0213
  E CLK TOY clock
battery low?

  B MEM Memory
???

  6 SCSI-A SCSI-Controller B (Maionboard or daughtercard)
Not terminated? No devices found?

  4 8PLN Option module (8 plane graphics)
No (proper terminated) monitor connected? (Yes, that can be detected.)

> I'm going to drop in a 1gb disk
You may have problems booting from disks > 1GB, depending on the PROM
version. So this may be an issue if your disk is 1GB + a few kB.

> I may throw a disk in for *BSD as well... I assume I can boot either
> drive.
Should work.
-- 
tsch??,
         Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
Received on Wed Jul 25 2001 - 06:40:11 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:53 BST