IBM MCA card to ID.

From: Chad Fernandez <fernande_at_internet1.net>
Date: Tue Jul 31 02:08:51 2001

That was my first thought too. I have 2 Digiboards here, However. The
4 port board has 4 big uart chips on it and is only a 16-bit card. The
16 port board doesn't have the same connector.... it uses ribbon cable.

Maybe he has an IBM Portmaster? Plugging it in to see what ADF it asks
for, is what I would do!

Neither one of my Digiboards will work on my Reply Powerboard, the 16
port board won't even let the computer show any video, anybody else have
any problems like that? I don't have an IBM planer to try.

Chad Fernandez
Michigan, USA

Terry Collins wrote:
> Just a 2c guess, would it be a Multi I/O card, like the digiboard or
> similar. I have * NCR 3434 boxen outside with similar ecternal connector
> and chip arrangement, although they are labelled as digiboards.
>
> --
> Terry Collins {:-)}}} Ph(02) 4627 2186 Fax(02) 4628 7861
> email: terryc_at_woa.com.au www: http://www.woa.com.au
> WOA Computer Services <lan/wan, linux/unix, novell>
>
> "People without trees are like fish without clean water"
Received on Tue Jul 31 2001 - 02:08:51 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:55 BST