EXORbus cards, info needed

From: joe <rigdonj_at_intellistar.net>
Date: Tue Jun 12 19:34:55 2001

At 03:29 PM 6/12/01 -0400, you wrote:
>Hello all,
>As promised, here is the list of EXORbus cards that I have... Any docs or
>information on these would be greatly appreciated! (Thanks to Mike and Joe
>for already replying to my previous post)...
>1 MEX68WW Wire-Wrap prototyping Board (uh, well, I guess this one is
>self-explanatory :-) )

     Not much to tell. Standard size EXORciser plug-in module, compatible
with EXORciser bus, standard pin spacing for 14, 16 and 24 pin wire wrap
sockets, provisons for two 50 pin ribbon cables.

>1 CMS 9601-501 "Utility Buffer/Cable Breakout" Board (2 ports)
>1 CMS 9601-503 "Cable Breakout" Board (8 ports)
>2 Chrislin Industries memory board -- 32 4116 chips
>2 Motorola Micro Module 1A (one has 4 2708 EPROM's, labels all faded)

   Features: MC 6800 MPU, one 6850 Async Communications Interface Adapeter
(ACIA) with RS-232 interface, two 6820 PIAs, 1 MHz crystal, 1K static RAM,
1k AROM (what's an AROM?) or ROM (or 2k) firmware program memories, on
board reset circuitry, Dynamic RAM refresh circuitry, 59k or 55k of unuse
dmemory space available (depending on the type of ROM selected), EXORciser
and Micromodule family bus compatible.

Received on Tue Jun 12 2001 - 19:34:55 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:58 BST