RQDX3 under RT11

From: healyzh_at_aracnet.com <(healyzh_at_aracnet.com)>
Date: Wed May 2 10:24:53 2001

> Does any know if the RQDX3-AA controller is supported by RT11v5.4 b, or
> do I have to get an upgrade.
>
> Paul

It'll work just fine starting with at least V5.3. However, if you're using
this commercially you really should look at replacing the controller with a
SCSI controller, though you might want to keep the RQDX3 in the system for
the RX50 floppies. I personally consider it very dangerous to trust data to
MFM Hard Drives considering thier age. I'd recommend either a CMD or Viking
SCSI controller.

                        Zane
Received on Wed May 02 2001 - 10:24:53 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:06 BST