HP mouse and DEC coiled cable and wanted items to trade or buy.

From: Don Maslin <donm_at_cts.com>
Date: Fri May 4 16:11:20 2001

On Fri, 4 May 2001 jpero_at_sympatico.ca wrote:

> Here's the two items I'm peddling off to trade for one or two ADB
> M-M cables. Shipping is free because these two items is rather
> light.
>
> If any of you want either one or both let me know.
>
> HP mouse, 46060A. Condition: light scuff marks, bit bent to one of
> two latches but *no* damage on that jack end, still can latch. Only
> two items, missing locking ring and has non-original HP mouse
> ball. Does roll freely when moved around viewed through plexglas. I
> know the spring loaded is pushing ball against two rollers. Do not
> have HP machine to test this with. ASIS, either try or for parts to
> fix other HP mouse.
>
> Digital Equipment Corporation, coiled cable w/ jacks
> part number: 17-02643-03, assembled in USA on that
> sticker. Still heat-sealed bag is well-handled but the cable itself
> is still new and undamaged. Also inside that still-sealed bag is
> piece of folded paper, appears to be diagram of a back of a keyboard
> w/ that cable. Hard to tell because I'm viewing that shadow from
> paper wrong side..
>
> Also I have Compaq replacement motherboard for LTE 386s/20 still
> unopened in it's packaging like new and worn original box it came in.
> The bios version is -003 means it does support dual 8MB
> modules. This is rare few notebooks to have cache the
> system performance tests proves this. Yes, I looked through that
> anti-static package on that bios version with strong flashlight and
> lope and looked at quick reference.
>
> By the way, one used 8MB card for that LTE 386s/20, perfect
> match to go with this replacement LTE 386s/20 motherboard, it works
> in my former LTE 386s/20 bios -002 but according to quick ref says
> bios -003 is required to handle two 8MB modules. This card also work
> in all LTE Lite series but not LTE Lite4 series.
>
> Wanted:
>
> For this compaq parts or to buy, I'm looking for Mac logic board or
> stripped of down of its drives mac w/ motherboard and vram still in
> it. Interest of items I'm looking for: LC475, Quadra 605.
> In these two models, If that pair of vram sticks is missing it won't
> work and I do not have two vram sticks on hand.

You might want to look around www.junkyardjeff.com who has a pretty good
selection of Mac pieces for sale.
                                                 - don

> Or, HPV 1MB video card PDS for 7100 and 8100.
>
> Or, LC PDS ethernet daughterboard for LC, II, III and III+, performa
> 465/466. TP (jack type) but I could accept coax interface (BNC
> type).
>
> Looking to buy for my use:
> If you have crashed fireball ST scsi 3.2GB but good circuit board, I
> need it, I pay both shipping and small cost for it. I suggest ditch
> the HD pack, just that circuit board to save on shipping and for data
> security if that pack turned out good. Cannot be 1.6GB, 2.1GB,
> 4.8GB or 6.4GB due to programming on that circuit board is not same
> as 3.2GB. Only requirement these defectives should spin up and whack
> noisily it's heads silly, signifying disc pack is gone. The bad
> logic boards makes HD totally dead, no spin, no seeks. That is, you
> can save those if you find good boards for these like I'm doing to
> mine. Warrenty period on these fireball ST series is over or about
> running out.
>
> Cheers,
>
> Wizard
>
Received on Fri May 04 2001 - 16:11:20 BST