o-scope

From: Jim Strickland <jim_at_calico.litterbox.com>
Date: Sun May 6 16:28:07 2001

> No not required to match. That specification is the capacitance
> presented
> across the input jack along with the scopes input resistance (usually
> 1megohm).
> Most scope probes have an adjustment to compensate for this and therefor
> it's not a problem.

I found the adjuster on this probe, and I can make the waves *sort of*
square. Not like in the picture in the manual though.

> Probe compensation is off or the amplifier (vertical) are misadjusted
> internally.

Ookay, how do I fix this? Is there an adjustment screw inside? And if so,
any recommendations on what not to touch so I live through the experience? :)

>
> A square wave on that series should look square.
>
> Allison
>


-- 
Jim Strickland
jim_at_DIESPAMMERSCUMcalico.litterbox.com
-----------------------------------------------------------------------
                              BeOS Powered!
-----------------------------------------------------------------------
Received on Sun May 06 2001 - 16:28:07 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:07 BST