destinking the computers

From: Claude.W <claudew_at_videotron.ca>
Date: Tue May 15 20:57:24 2001

What about this idea:

Taking all the parts that can be "dipped" and making them sit in very hot
water in a large plastic garbage can with some kinda "citrous based"
cleaning product mixed in?

Will the hot water not "open up" the plastic "pores" a bit and let in leech
a bit of the smelly stuff out.

I used to be able to dye plastic parts (teflon and similar) easy with
boiling water and Tintex clothing crystal dies. I think the hot water really
"opens up" the plastic and can really get into the top layers...

And this idea : how bout trying to bring back a yellowed (UV light) computer
case by dying it with white TINTEX crystals in hot boiling water...???

Ill have to try that one...

Up here, nooks and crannies get the treatement from a brush with long
brissles..."flings the crap out"...

Claude


----- Original Message -----
From: <jpero_at_sympatico.ca>
To: <classiccmp_at_classiccmp.org>
Sent: Tuesday, May 15, 2001 5:06 PM
Subject: Re: destinking the computers.


> > Date: 16 May 2001 0:50:25 +0100
> > From: "Iggy Drougge" <optimus_at_canit.se>
> > Subject: Re: destinking the computers.
> > To: jpero <classiccmp_at_classiccmp.org>
> > Reply-to: classiccmp_at_classiccmp.org
>
> > jpero skrev:
> >
> > My A4000 came out of the household of an aging smoker, who was losing
his
> > tests of grey hair. Not only did the machine smell (a lot!), it was also
> > coated with tar and other airbourne substances, into which his hair had
stuck.
> > Then there was the coffee and dead flies in the keyboard.
> > In any case, I and a mate stripped the machine down as thoroughly as
possible,
> > then proceeded to use a brush to wipe the dust off the PCBs and remove
the
> > sticky film with some kind of clinical alcohol and tops (the kind you
put in
> > your ear).
>
> Qtips or ear swabs is what they are called.
>
> > Ah yes, we washed and scrubbed the case like you would with any dirty
plate in
> > the kitchen sink.
>
> In that case with A4000 case it's simple smooth case with few
> crevices. Take apart Mac II, you will understand what I'm facing
> with this task. I once cleaned plastic grills for a household fan
> (that type that used round rotating vanes to direct air around via
> small motor.) Very tedious and hard, imagine that brushing hard with
> old toothbrush on small square of hole getting all grime and dust
> out. Mac II case is like that most of cavities are hidden.
>
> To few who have stinky cigarette-coated and others that is
> spoiled with grease films (as from kitchen enviroments) machines,
> mechanical cleaning and harsh chemicals and active chemicals is only
> way to break down those dried tough rancid oils (hardened like
> linseed oil on wood).
>
> Once I tried the major cleaning on a minitower peecee case (just
> that it, threw out working PSU. (!!) ) of cigarette smoke stain.
> Plastic sucks up stain+stink while painted surfaces does to
> small degree. Even well scrubbed and very C-A-R-E-FULLY few times
> with many cleaners and alcohol, lots of paper towels. I can't get
> smell totally out. Actually still emits stink strongly even surfaces
> is spotlessly clean and towels came up clean after last few
> days of off and on attempts. Gave up and traded it away for small
> "cash" towards other stuff.
>
> The multi-year of kitchen grease coating is TOUGH! Nothing we can
> find will touch it, boiling it in water and some soap got it softened
> enough to scrape'n scrub off with some work. That yuck was on
> kitchen plastic fan to get noise and viberation down in a college apt
> kitchen fan once, clean fan ran much better and quieter on oiled
> motor. :-)
>
> Mildew and fungus growth matter are stuck to the all surfaces and has
> to be removed by oxidizing action, scrubbing merely remove some of
> them.
>
> Cheers,
>
> Wizard
>
> > En ligne avec Thor 2.6a.
>
Received on Tue May 15 2001 - 20:57:24 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:08 BST