PDP-11/53

From: Pete Turnbull <pete_at_dunnington.u-net.com>
Date: Fri May 18 16:21:01 2001

On May 18, 13:41, healyzh_at_aracnet.com wrote:
> On May 18, 14:06, Eric Dittman wrote:
> > I've been gifted with a PDP-11/53 (or 53+) CPU module.

> I just heard from someone a few minutes ago, that if you've got a 3rd
party
> disk controller that you can boot the system off you should be able to
> simply remove the ROM's.

Well, only if they fit, physically and electrically. Most 3rd-party boot
ROMs I've seen (eg Dilog, Emulex, Plessey, GR, etc) wouldn't be the right
type for the board. The code might work; I suspect the ROMs from an 11/73
or 11/83 might work. I never used an 11/53 much, but from what I remember
it's pretty much like other 11/73+ or 11/83 boards, just with memory on it
as well as SLUs and bootstrap etc. I've no doubt someone else (Megan?
Allison? others?) can expand on the differences.

-- 
Pete						Peter Turnbull
						Network Manager
						University of York
Received on Fri May 18 2001 - 16:21:01 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:08 BST