Jarkko Teppo skrev:
>Quoting Iggy Drougge <optimus_at_canit.se>:
>> jarkko.teppo skrev:
>> >http://www.tec.puv.fi/~s99137/kuvat/380takaa2.jpg
>> >http://www.tec.puv.fi/~s99137/kuvat/380takaa.jpg
>>
>> >Then you have a 380. The machine in those crummy pictures has a DIO-I
>> >expansion cab.
>>
>> So does mine, if that's the card with the ugly card-edge connector into
>> which
>> the additional LANCE board is plugged.
>The expansion cab is the second cabinet with DIO-I slots in it.
>The processor card is DIO-II and the extra lance card is DIO-I.
>At the moment I have 3 * DIO-II and 5 * DIO-I. I'm also thinking
>about expanding the expander, although it might slow things down
>due to shared interrupts. We'll see. There also exist DIO-II to
>DIO-I converters, you might have one of those.
PCI runs on shared interrupts and seems fast enough to me.
>> It's plugged straight in. Good for me.
>Depends on if you have a lot of HP-IB disks. I have, I want more :)
HPIB disks? Can't say that I've seen a single one in my entire life.
>> Now, should I just run NetBSD or is HPUX any more sufferable on the 380
>> than
>> on the 832?
>Depends if you want to use it for anything useful or not.
I really can't imagine either system doing anything useful, since I'm
essentially a UNIX hater, so that is of secondary importance. I just can't
deal with HP-UX 10.something on the 822, it's so dreadfully slow, and then
it's got binaries cluttered all over /etc for some very odd reason.
>IMHO a 380 is one the best 300-series machine there is (well, 385..)
But then all that would require is a new crystal, right?
>It's fast, can take a lot of memory and if you've got some kit it's
>a joy to expand. I've had at one point 13 hard drives + a big bunch
>of tape drives from 9-tracks to 9144/9145 + DATs. Dual framebuffers
>are cool if you've got 'em and so on.
>I'd suggest you give HP-UX a go and then install NetBSD. You could try
>one of the 4.3-reno=> (?) versions too.
I don't suppose HP have got any hobbyist programme?
--
En ligne avec Thor 2.6a.
Se pensate che alcune sigle dei cartoni in Italia siano bruttine, ascoltatevi
quella di Kenshiro in francese ("Ken le survivant")... Non saprei se sia pi?
trash questa o quella di Mazinga Z in Francese...
Nicola Solati om den franska signaturen till Hokut? no Ken
Received on Sat May 19 2001 - 19:35:59 BST
