On May 27, 20:37, jkunz_at_unixag-kl.fh-kl.de wrote:
> I decided to write a NetBSD driver for the DEC QBus RXV21 8" floppy
> controller. Unfortunately I have only two controllers, no 8" drive nor
> medium. I thought that this would'nt be a problem, as it is possible to
> connect a 5.25" drive to a 8" floppy controller.
Yes, but you've not got a controller. You've only got the QBus interface
that taslks to the controller, which is in the RX02 chassis. Unless what
you have is a Plessey or General Robotics RXV21 (GXV21?) which connects to
8" that have an SA800/SA850 interface. That, however, is a very different
animal.
> But the medium needs to
> be reformated. Now that I have the controller doc, I had to read that
> the RXV21 can not format a floppy. It needs preformated media.
Well, if you have a real RX02, it can "reformat" RX01 disks. I doesn't
actually reformat them in the sense that is usually meant, though. It
takes a disk already formatted with 128-byte single-density sectors (IBM
standard) and rewrites the data portion of each sector (NOT the headers,
which remain FM) as 256-byte blocks in MFM.
> Would it be possible to use some other machine* with 5.25" floppy drive
> to format the 5.25 media an way that the RXV21 can read it?
You could use a PC to format a disk so it looked like a single-density 8"
disk laid out the same way as an RX01 disk. To do that, you'd need a
suitable drive, and controller that can handle 250kHz data in FM
(single-density). Your RQDX controllers certainly can't do it.
--
Pete Peter Turnbull
Network Manager
University of York
Received on Sun May 27 2001 - 15:40:44 BST