Multibus I items For Sale

From: Richard Erlacher <edick_at_idcomm.com>
Date: Mon Nov 26 16:52:15 2001

The SMD 2180, seems to me, must be an SMD interface. The control cable is
60-pins and the data cables are 26. It fits the model.

Dick

----- Original Message -----
From: "Rich Beaudry" <r_beaudry_at_hotmail.com>
To: <classiccmp_at_classiccmp.org>
Sent: Monday, November 26, 2001 2:48 PM
Subject: Multibus I items For Sale


> Hello all,
>
> I am trimming back my collection of Multibus I items. I am still keeping
> some card cages, power supplies, prototyping cards, and other cards, but I
> need to make room for other stuff :-)
>
> I would like to get some small amount of $$ per card, plus shipping, so
> please make offers. I will take offers until Thursday morning, to give the
> international and digest readers time to make offers. Stuff goes to the
> highest bidder, and remember, $0.00 is a valid bid.
>
> The vast majority of this stuff is untested, and is sold strictly as-is, so
> keep that in mind when bidding. I'm not looking for eBay prices, but I did
> pay for a lot of this stuff, so I'd like to get some of it back.
>
> Oh, by the way, MAKE ALL OFFERS OFF-LIST!!!!! I will NOT post updates to
> the list. Offers made to the list will be summarily dropped in the
> bit-bucket, and the offender will be summarily dropped into the molten iron
> bucket. Also, please do NOT email me and ask what the current high bid is.
> Make your bid, and deal with it :-)
>
> No documentation is included, unless stated explicitly below.
>
> Here's the list:
>
> - Qty. 8 Intel PWA-1000359 (seven are further marked "REV 01B"). These are
> in fair condition, some scratches on the tops of some ICs, and the ceramic
> caps are scratched. Also, the rotary switches for address decoding have
> lost a bit of their "snap", and are mushy to turn.
> - Qty. 7 Micro Industries BLC-508 I/O Expansion board. Seven of these are
> still in their original box, with waranty card. The eighth is unboxed, but
> in equally excellent condition. These are very nice boards, and although
> they all show light markings on the edge connectors, they haven't been used
> a lot. Rotary switches all snap nicely.
> - Qty. 1 National Semicondutor BLC-508 I/O Expansion board. Nice condition,
> very clean.
> - Qty. 1 Intel Comm. Expansion Board, PWA 1001197-04 L B F. Looks like an
> SBC-534, but it's not marked "534", so I'm not sure. Board in good
> condition.
> - Qty. 1 Ciprico Tapemaster. P/N 81006101A. 2 50-pin connectors for tapes,
> board in nice clean condition.
> - Qty. 1 OMEX Interface/Format Memory board. No idea what this is for, but
> the board is in nice clean condition.
> - Qty. 1 SMD 2180. Again, no idea what the board is for. 1 60-pin
> connector, 4 26-pin connectors. Nice clean condition.
> - Qty. 3 Multibus bus-extender boards. One is by Prototek, one by National
> Semiconductor, and the third is a no-name brand.
> - Qty. 1 Intersil MCB 512 memory board. Again, nice and clean. I believe I
> also have the manual for this.
> - Qty. 1 Plessey PSM 512 memory board. Nice and clean. I believe I have
> the manual for this.
>
> The Plessey board, or the Intersil board (can't remember) is not fully
> populated, and does not have sockets for the missing chips (ie, you'd have
> to solder in sockets, or solder in the chips). Keep that in mind....
>
> Shipping will be by USPS to anywhere in the world they let me ship.... I
> will quote actual shipping charges when I know who gets what....
>
> Thanks!
>
> Rich B.
>
>
>
Received on Mon Nov 26 2001 - 16:52:15 GMT