if you have a scanner, you could turn them into a PDF :) I was just trying
to be helpful....
At 02:38 PM 11/29/01 -0700, you wrote:
>I've got several copies. No need to pay 60 cents per sheet. If copies are
>needed, I'll get them made for you at whatever the local minimum is, probably
>about 5 cents/page, though I haven't used Kinko's in a few years.
>
>Dick
>
>----- Original Message -----
>From: <geoffr_at_zipcon.net>
>To: <classiccmp_at_classiccmp.org>
>Sent: Thursday, November 29, 2001 1:57 PM
>Subject: Re: Re: Ampro Littleboard problems..
>
>
> >
> > http://njcc.com/~hjohnson/s_drives.html
> >
> > Has the manual for sale, 30 pages _at_ 25C a page....
> >
> > > On Wed, 28 Nov 2001, Gene Buckle wrote:
> > >
> > > I've got a Littleboard I'm tring to bring up. When I feed it a disk,
> > > and power it up, it will select the drive, spin it and shut down after
> > > about 3 to 5 seconds. I never hear a head step. Nothing shows up on the
> > > serial port (port a, 9600). The drive I'm using is a Teac FD-54B-02-U
> > > and the two jumpers are set to DS0 and IU.
> >
> >
> >
Received on Fri Nov 30 2001 - 01:06:25 GMT