EISA - was VLB SCSI?

From: M H Stein <mhstein_at_usa.net>
Date: Fri Nov 2 16:14:55 2001

Thanks for the tip; will give it a try now that you've reassured me.

I don't think it's the battery since the config is stable, i.e. the
power can be off for a weekend and everything's still fine when it's
powered up again, just that annoying F1 request, and the problem started
when I removed that modem and had to change IRQ's. I was reluctant to
pull the battery & reset the config in case that really messed things
up; at least now it's bootable. But sounds like it can't hurt to replace
the battery, so might as well while I'm at it.

mike

-----------Original Message----------

Date: Fri, 02 Nov 2001 02:45:53 -0500
From: Chad Fernandez <fernande_at_internet1.net>
Subject: Re: EISA - was VLB SCSI?

re-read what he said..... he isn't loosing the configuration, it justs
wants attention. I have had this happen before too. I just change
things until it stops :-) I think something gets crossed up when
changing things around too much, and it asks for F1 to be pressed. You
can start over from scratch by pulling the battery..... I have had to do
that once or twice when I really screwed things up, to the point that it
hung while the bios was loading :-)

Chad Fernandez
Michigan, USA
Received on Fri Nov 02 2001 - 16:14:55 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:13 BST