Hi.
> Anyway - as the cables were damaged beyond repair before it arrived (a
> 2' length is missing from the middle) I'd like to know what's needed to
> hook up these SMD drives (apparently M2372K and M2351AO - but I've not
> checked that yet) to the Emulex QD32 controller I have :&)
You need a 60 pin flat ribbon cable that goes to the drives in a bus topology
with the last dive terminated. (Much like SCSI) Then you need a separate
24 (26?) pin flat ribbon cable per drive from the controller to each drive.
Should be easy to get the components and crimp the cables.
I have the manual for the QD32 / QD33. If you can not find scans of the
manual, let me know...
--
tschüß,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
Received on Tue Nov 13 2001 - 08:12:26 GMT