Corvus Floppy Drive?

From: Frank McConnell <fmc_at_reanimators.org>
Date: Tue Nov 13 18:47:01 2001

"Curt Vendel" <curt_at_atari-history.com> wrote:
> My quest for the elusive Corvus Concept finally ended as I was able to
> obtain one of the beastie's in excellent shape. There is mention of a disk
> drive for the system, I'm wondering if there are any other Concept owners
> out there who have explored the inner workings of the unit.

Congratulations!

Corvus made 8" and 5.25" floppy drives for the Concept, and matching
controller(s) that fit in one of the Concept's slots. The
controller(s) are based on the WD1793 FDC.

The 8" disk drive is a Tandon half-height 8" (848?) in a box with
power supply. Nothing special except it says "Corvus Systems" on the
box.

The 5.25" disk drive...well, I can't remember:

(a) whether it used the same controller as the 8"
(b) if so, what they did to get from the 50-pin connector on the
    controller to the 34-pin connector on the drive

Most Concept floppies that I've seen have been 8", and I've only seen
one of the 5.25" drives.

-Frank McConnell
Received on Tue Nov 13 2001 - 18:47:01 GMT