You can also just replace the keyswitch with a standard 3-position toggle
switch... just unplug the keyswitch from the machine, cut it off the little
wiring harness they use, and replace it. It does make the machine less pretty
(or at least less authentic...you can just leave the lock in the machine's
case), but it'll work...
Tony Duell said:
>
> Most locks are designed to be difficult/impossible to dismantle from the
> front when locked (for obvious reasons), but sometimes they are a lot
> easier to work on if you can remove the lock mechanism and get to all sides.
>
> I've done a bit with the tubular keys/locks used on the PC/AT cabinet,
> and on DEC machines, etc.
>
> Generally, you take off any cams/levers on the back (obvious nut) and
> take out the lock itself (slide-on clip, or another nut).
>
> On the IBM PC/AT one, there's a pin inserted from one side that holds it
> together. You have to drill this out (and you need at least a drill stand
> and prefereably a pillar drill or machine tool to do this). Then the back
> plate comes out of the housing and you can dismantle the lock. It
> consists of a disk with holes that rotates, and a set of pins, similar in
> concept to those in a Yale-type cylinder lock inserted in those holes.
>
> Once you've got it apart, you can do several things :
>
> 1) Reassemble it with no pins. Any key that will physically fit will turn
> it (even that DEC plastic key!). Who cares about security on a classic
> computer
>
> 2) Modify a key you have to suit the pins. You can mill the notches
> deeper in the key and re-arange the pins. Obviously you need to find a
> key where you can arrange the pins so that there are no notches that are
> too deep
>
> 3) Make up a set of pins to suit the key you have. You may even be able
> to buy the pins if you know a friendly locksmith (although in my
> experience such people are not keen to supply hackers with parts, even
> things like pins which couldn't possibly be used for breaking-and-entering).
>
> -tony
- Dan Wright
(dtwright_at_uiuc.edu)
(
http://www.uiuc.edu/~dtwright)
-] ------------------------------ [-] -------------------------------- [-
``Weave a circle round him thrice, / And close your eyes with holy dread,
For he on honeydew hath fed, / and drunk the milk of Paradise.''
Samuel Taylor Coleridge, Kubla Khan
Received on Mon Sep 17 2001 - 09:50:48 BST