What's the volts for P70/P75 plamsa display on yours?

From: jpero_at_sympatico.ca <(jpero_at_sympatico.ca)>
Date: Thu Sep 27 17:51:46 2001

> Date: Thu, 27 Sep 2001 21:22:24 -0500
> From: Bill Bradford <mrbill_at_mrbill.net>
> To: classiccmp_at_classiccmp.org
> Subject: Re: What's the volts for P70/P75 plamsa display on yours?
> Reply-to: classiccmp_at_classiccmp.org

> I have two of these, minus the back panels, free for pickup in
> Austin, TX. One of them worked perfectly except for a bad HD, the
> other didnt power up at all - so I tried to swap the HD from the
> bad unit into the good one. When I got everything reassembled,
> neither will power up now... but I couldnt bring myself to throw
> them away. Sometime since then, the back panels have been lost.
> Keyboards and everything though... so let me know if anybody wants
> them.
> The screen on the "good" unit was absolutely beautiful when it worked.
> Bill

Which one? P70 (386) or P75 (486)?

On both types, motherboard have load of fuses, HD, FD, and few
others! Good old IBM nutiness. Did you mean you got power on power
LED lit and fan spinning but no POST?

If you note my email address, I'm in canada. 8-O

Still haven't got any replies w/ their measured volts on 5 wire cable
for panel.


Received on Thu Sep 27 2001 - 17:51:46 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:26 BST