> > I checked again. The connectors on the VAX 4000/500 are identical to
> > SCSI connectors.
> But the wiring to the ribbon cable is different. DSSI uses a 1:1
> mapping of pin numbers. The HD50 connector for SCSI is wired this way
> to the ribbon cable:
> HD50 ribbon
> 1 1
> 2 25
> 3 3
> 4 26
> 5 5
> 6 27
> ... ...
Yes, but if the connectors on both ends are the same I would be
able to use a SCSI cable to go from the 4000 to the HSD05.
--
Eric Dittman
dittman_at_dittman.net
Check out the DEC Ethusiasts Club at http://www.dittman.net/
Received on Fri Sep 28 2001 - 04:26:29 BST