Thilo Schmidt wrote:
> > Why? As far as I can see either can be changed easily.
> If you implemented the thing in discrete logic it's probably
> possible to change it by soldering wires all over the board,
> but if you made an ASIC you would have to change the masks and
> physically replace all chips made...
>
> Of course if you use a FPGA it really makes no difference...
Nope you have 3 levels of routing there. 1) Vaporware for the ram based
stuff.
2) Firmware for the EEPROM types 3) Hardware for the anti-fuse based
types.
--
Ben Franchuk - Dawn * 12/24 bit cpu *
www.jetnet.ab.ca/users/bfranchuk/index.html
Received on Thu Apr 11 2002 - 10:26:15 BST