TTL computing

From: ajp166 <ajp166_at_bellatlantic.net>
Date: Mon Apr 15 19:53:44 2002

Yep, and old and well known program.

Allison

-----Original Message-----
From: Richard Erlacher <edick_at_idcomm.com>
To: classiccmp_at_classiccmp.org <classiccmp_at_classiccmp.org>
Date: Monday, April 15, 2002 8:06 PM
Subject: Re: TTL computing


>Well Palasm4 v1.5 is the last version of that, and I use it all the
time. It
>was still a freebie on the LATTICE website last time I looked.
>
>Dick
>
>----- Original Message -----
>From: "ajp166" <ajp166_at_bellatlantic.net>
>To: <classiccmp_at_classiccmp.org>
>Sent: Monday, April 15, 2002 1:39 PM
>Subject: Re: TTL computing
>
>
>> Entirely likely, I did get a lot of stuff from MMI over the years
>> and some of the other related companies. I still have and use
>> PALASM and PALASM90.
>>
>> Allison
>>
>> -----Original Message-----
>> From: Richard Erlacher <edick_at_idcomm.com>
>> To: classiccmp_at_classiccmp.org <classiccmp_at_classiccmp.org>
>> Date: Monday, April 15, 2002 3:10 PM
>> Subject: Re: TTL computing
>>
>>
>> >It may, in fact be about the same as my old version. I got mine from
>> MMI back
>> >when THEY were the ones pushing FPGA technology.
>> >
>> >Dick
>> >
>> >----- Original Message -----
>> >From: "ajp166" <ajp166_at_bellatlantic.net>
>> >To: <classiccmp_at_classiccmp.org>
>> >Sent: Monday, April 15, 2002 8:13 AM
>> >Subject: Re: TTL computing
>> >
>> >
>> >> Xact, and older, much older version. I'd get the version number
>> >> but the termcap file is OTL and I'm working on something else
>> >> right now. That and a few bits provided by Tim olmstead to help
>> >> with simulation. He was the one that got me into using them.
>> >>
>> >>
>> >> Allison
>> >>
>> >> -----Original Message-----
>> >> From: Richard Erlacher <edick_at_idcomm.com>
>> >> To: classiccmp_at_classiccmp.org <classiccmp_at_classiccmp.org>
>> >> Date: Sunday, April 14, 2002 11:46 PM
>> >> Subject: Re: TTL computing
>> >>
>> >>
>> >> >Do these tools have names, Allison? My old DOS-based tool for
FPGA
>> >> >development, from MMI, was called XACT, and that's what was
intended
>> for
>> >> the
>> >> >2000-series devices. A later version supported the 3000 series.
>> >> >
>> >> >Which tools do you use for developing both 2000 and 3000-series
>> >> bitstreams?
>> >> >
>> >> >Dick
>> >> >
>> >> >----- Original Message -----
>> >> >From: "ajp166" <ajp166_at_bellatlantic.net>
>> >> >To: <classiccmp_at_classiccmp.org>
>> >> >Sent: Sunday, April 14, 2002 8:28 PM
>> >> >Subject: Re: TTL computing
>> >> >
>> >> >
>> >> >> From: Richard Erlacher <edick_at_idcomm.com>
>> >> >>
>> >> >>
>> >> >> >Which tools are you referring to, Allison?
>> >> >>
>> >> >>
>> >> >> OLD tools, as in dos based.
>> >> >>
>> >> >> >I've found that the tools I once used with the old (pre-1990)
>> 2064's,
>> >> >> don't
>> >> >> >work with the 3000-series, and, though I have some 3000-series
>> parts
>> >> >> (which,
>> >> >> >back when I bought them, cost about $200 each) I've not figured
>> out a
>> >> >> way to
>> >> >> >program them using the old XACT or the more recent "Foundation"
>> >> >> software.
>> >> >> >They clearly are no longer supported with current software.
>> >> >>
>> >> >>
>> >> >> Neither have I. I also have the Synario package too. They
phased
>> out
>> >> >> the tools for the 2064s a long time ago.
>> >> >>
>> >> >I have Synario for the Atmel devices. It's a Windows-based tool
>> based,
>> >> I
>> >> >think, on a tool set originally cooked up by Data I/O.
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>>
>>
>
Received on Mon Apr 15 2002 - 19:53:44 BST