I'm not sure which one the 188 is but I have the 180B which emulates the Z-80 CPU (but I'm missing the pod for it :-( I also a complete unit that emulates the 8085 CPU but I don't have it handy and I don't remember the model number. Al Kossow has the manual for one of the models posted on his website but I don't have the URL to it. Basicly they plug into a target system and let you single step, set breakpoints, examine/change memory and CPU registers. If you have the optional memmory in your unit, you can set it to "replace" any part of the system memory. That means that you can load your software in it and run it just as if it was in the target system. I think you can operate the EMxxx from a computer but I'm not certain. But you can use the RS-232 port to upload and download test software into it. There's also socket on the front of the EMxxx that you can plug an EPROM into. It intended for use with EPROMs that contain test routines for the target system.
This is just a brief description based on what I remember off the top of my head. The AMC systems look like very usefull devices provided that you get the pods with them.
Joe
At 06:35 PM 8/19/02 -0400, you wrote:
>
>>Date: Mon, 19 Aug 2002 08:59:32 -0400
>>To: cctalk_at_classiccmp
>>From: "Charles E. Fox" <foxvideo_at_wincom.net>
>>Subject: : Applied Microsystems EM 188
>>
>>
>>>Date: Mon, 19 Aug 2002 08:54:44 -0400
>>>To: cctalk_at_classicmp.org
>>>From: "Charles E. Fox" <foxvideo_at_wincom.net>
>>>Subject: Applied Microsystems EM 188
>>>
>>> Over the weekend I acquired a goodly load of equipment,
>>> including an Applied Microsystems EM 188 "Diagnostic Emulator". While
>>> Applied Microsystems are still with us, they apparently have forgotten
>>> all about this product.
>>> Does anyone happen to have any information about it?
>>>
>>> Regards
>>>
>>> Charlie Fox
>>>
>>> Charles E. Fox Video Production
>>> 793 Argyle Rd.
>>> Windsor Ontario Canada N8Y 3J8
>>> 519-254-4991 foxvideo_at_wincom.net
>>> Check out the "Camcorder Kindergarten"
>>> at http://chasfoxvideo.com
>>
>>
>> Charles E. Fox Video Production
>> 793 Argyle Rd.
>> Windsor Ontario Canada N8Y 3J8
>> 519-254-4991 foxvideo_at_wincom.net
>> Check out the "Camcorder Kindergarten"
>> at http://chasfoxvideo.com
>
>
> Charles E. Fox Video Production
> 793 Argyle Rd.
> Windsor Ontario Canada N8Y 3J8
> 519-254-4991 foxvideo_at_wincom.net
> Check out the "Camcorder Kindergarten"
> at http://chasfoxvideo.com
>
>
>
Received on Mon Aug 19 2002 - 18:07:01 BST