OT: Mylex problems

From: Richard Erlacher <edick_at_idcomm.com>
Date: Sun Feb 3 13:40:05 2002

I've verified that the drives, cable chain, and termination works perfectly
with Adaptec and SIIG controllers. I'm thinking that the problem lies
strictly in the plug-n-play setup. Is there a way to "force" these
assignments on this card? The Win95 clearly complains of conflicts in nearly
every resource. I'm looking at trying to force it in a different motherboard,
since the BIOS features of this HP system are somewhat restrictive and not
totally transparent.

see below, plz.

Dick
----- Original Message -----
From: "Tothwolf" <tothwolf_at_concentric.net>
To: <classiccmp_at_classiccmp.org>
Sent: Sunday, February 03, 2002 11:21 AM
Subject: Re: OT: Mylex problems


<snip>
>
> Has Mylex discontinued this board? A couple years ago they discontinued
> nearly all of their SCSI products.
>
ISTR that IBM bought MYLEX about 4 years or so back. This particular series
of controllers has been discontinued, but this is the series with which I've
had prior contact, albeit not with Windows. I looked at their website
yesterday, and found no mention of IBM, but then, I wasn't looking for that.
It's possible, however, that they've disposed of the MYLEX resource.
Received on Sun Feb 03 2002 - 13:40:05 GMT