HP 9000 battery update

From: Christopher Smith <csmith_at_amdocs.com>
Date: Tue Feb 5 13:05:58 2002

> -----Original Message-----
> From: Bob Brown [mailto:bbrown_at_harper.cc.il.us]

> Physically, where is the case was the battery?
>
> I have a G40 downstairs in our datacenter.

Take the front plate off -- you'll need a torx bit. (Also note
that the faceplate slides straight up, then straight out. You
might damage something if you're really adamant about pulling
it off sideways, or straight out before you lift up on it.)
Each power supply has two screws holding it in (torx again).
You'll also need to remove the drive cage above the PSU before
you pull the power supply out. (two more torx screws, near the
top of the cage) I think they're probably both the same, so
only one should need removed.

Once you get a PSU out (you shouldn't even need to pull it out
all the way...), look right in the front of the PSU, to the
right. I think that's the battery compartment. Mine is just
empty with a two-prong plug that I assume should plug into the
battery.

Chris


Christopher Smith, Perl Developer
Amdocs - Champaign, IL

/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
 
Received on Tue Feb 05 2002 - 13:05:58 GMT