> If you are using an electronic KVM, it may be on the
> edge of its range, or it could be bad cabling, long
> cabling, or a loose connection. I found out that
> electronic KVM's (especially older ones) have some
> fairly well-defined limits on bandwidth. Of course,
> mechanical ones do too, but for other (mechanical,
> crosstalk-type) reasons. I found that the more
> expensive cabling with real coaxial in it makes a big
> and visible difference on longer cable runs/higher dot
> frequencies.
I already made sure the cables were good. The KVM works
on the other three systems added, which are all driving
the monitor at 1600x1200 _at_75Hz or higher.
--
Eric Dittman
dittman_at_dittman.net
Check out the DEC Enthusiasts Club at http://www.dittman.net/
Received on Wed Feb 13 2002 - 21:00:13 GMT