On Wed, 20 Feb 2002, Lawrence Walker wrote:
> It syncs down to 15.5 khtz and should work. The problem is the 13 pin
> connector for the ST. Most of the older Nec multisyncs will work, with
> the exception of the 2A. I have details for making a switch-box but
> there are several people supplying adaptors at a reasonable price,
> also ones for SVGA.
> The 3D model is of course the holy grail of compatability, especialy
> for Amigas. But the 1401, the original NEC Multisync, is a neat
> monitor for collectors multi-purpose compatability. NEC has a good
> multisync page at
The real problem I've had with the 3D is that it wasn't made nearly as
well as earlier (and most later) monitors from NEC. Most every 3D I've
seen was either dead, or in really bad shape. Some of them could be
rebuilt.
I'm actually using an NEC 2A and a gs2A right now.
Speaking of all these old NEC monitors, does anyone know where I can get
the service manuals for the 2A/gs2A/3D/4D and a few others?
> http://support.necmitsubishi.com/nec/
Wow, NEC finally put all that info back online? I was wondering if they
ever would...
-Toth
Received on Wed Feb 20 2002 - 20:08:24 GMT