Ok, now got a little further using TERTIARY_VMB.EXE
.. and to next problem.
>>> B/R5:101/X:D/B:6 ET0
Initializing system.
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
A A . . M M M . . . . . . P TYP
o o . . + + + . . . . . . + STF
. . . . . . . . . . . . . B BPD
. . . . . . . . . . . . . + ETF
. . . . . . . . . . . . . B BPD
. . . . . . . . . + . . . . + . XBI D +
. . . . . . . . . . . . . . + . XBI E +
. . . . B1 A2 A1 . . . . . . . ILV
. . . . 32 32 32 . . . . . . . 96 Mb
ROM = 6.0 EEPROM = 2.0/6.0 SN = GA92000372
Loading system software.
Filename: TERTIARY_VMB.EXE
The filename for NICDrom MOP boot is: TERTIARY_VMB.EXE
* Passing control to transfer address
%VAXcluster, system loaded from node VAXVMS (AA-00-04-00-01-04)
%VAXcluster, PE boot driver timer control value = 00002710
%VAXcluster, creating channel, disk server VAXVMS
%VAXcluster, opening virtual circuit, disk server VAXVMS
%VAXcluster, PE boot driver successfully initialized, disk server VAXVMS
Bootfile:SYSBOOT.EXE
SYSBOOT> CONTINUE
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk%VAXcluster,
checking
for listen timeout
%VAXcluster, checking for listen timeout
%VAXcluster, listen timeout, disk server VAXVMS
%VAXcluster, no connection to disk server VAXVMS
%VAXcluster, closing virtual circuit, disk server VAXVMS
%VAXcluster, attempting to reconnect to a disk server
%VAXcluster, creating channel, disk server VAXVMS
%VAXcluster, opening virtual circuit, disk server VAXVMS
%VAXcluster, connected to disk server VAXVMS
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
%SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
%SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the
PAGEFILE.SYS%VAXcluste
r, checking for listen timeout
%VAXcluster, checking for listen timeout
%VAXcluster, listen timeout, disk server VAXVMS
%VAXcluster, no connection to disk server VAXVMS
%VAXcluster, closing virtual circuit, disk server VAXVMS
%VAXcluster, attempting to reconnect to a disk server
%VAXcluster, creating channel, disk server VAXVMS
%VAXcluster, opening virtual circuit, disk server VAXVMS
%VAXcluster, connected to disk server VAXVMS
OpenVMS (TM) VAX Version V7.2 Major version id = 1 Minor version id =
0
%VAXcluster, PE boot driver timer control value = 00002710
%VAXcluster, PE boot driver initialization failed, maximum retry limit
exceeded
%EXECINIT, error initializing boot device - R0 = 00000054
?06 Halt instruction executed
PC = 85CBC5BF
--
Saku Set?l?
System Planning Manager
Kolumbus Oy http://www.kolumbus.com/
Elisa Communications Group
Received on Fri Feb 22 2002 - 10:51:28 GMT