Packaging and electro-static discharge (was: Packing suggestions...)

From: R. D. Davis <rdd_at_rddavis.org>
Date: Sat Feb 23 20:52:51 2002

Quothe Chad Fernandez, from writings of Sat, Feb 23, 2002 at 07:35:42PM -0500:
> Tothwolf wrote:
> > Cables should also be bagged, and wrapped with bubble-wrap. Bagging is
> > mandatory if they are going to be packed in styrofoam. Styrofoam isn't
> > friendly to many types of insulation, and bits of styrofoam love to get
> > into connectors, especially the smaller ones that are hard to clean ;)

> Wow, I never knew that. I wouldn't have thought that styrofoam would
> hurt anything. Maybe it's a good thing that I have shipped very few
> cables. New cables I buy tend to be new surplus, so they are still
> bagged from the factory.

Why is electro-static discharge being ignored in these postings? At
the very least, please make sure that foam chips, bubble-wrap and
plastic bags (unless they're anti-static), etc. don't touch circuit
boards or any connectors. I've received more than one piece of
equipment that's been packed only in ordinary bubble-wrap, or
bubble-wrap and foam chips, and, while most of it appeared to be
undamaged, that's not to say that some damage wasn't done to the
circuitry which will result in eventual fauilure. Surely anyone who
collects computers should understand the effects of static electricity
on many types of integrated circuits. Basic electronics knowledge, at
a minimum, is vital to computer collecting if this hobby isn't to
become known as "computer destruction."

Just my two-cents worth.

-- 
Copyright (C) 2001 R. D. Davis The difference between humans & other animals: 
All Rights Reserved            an unnatural belief that we're above Nature & 
rdd_at_rddavis.org  410-744-4900  her other creatures, using dogma to justify such
http://www.rddavis.org         beliefs and to justify much human cruelty.
Received on Sat Feb 23 2002 - 20:52:51 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:48 BST