SCSI options for PDP 11/23

From: Ethan Dicks <erd_6502_at_yahoo.com>
Date: Thu Feb 28 01:17:45 2002

--- Tom Leffingwell <tom_at_sba.miami.edu> wrote:
> ...I work for a university on a National Science Foundation funded
> project that provides satellite communication to scientists at the
> geographic south pole...

Funny we should meet here... I've personally benefited from your work...

I worked at McMurdo from 1995 through 1997, and was at Pole for week
at the end of the 1995-1996 season. Among other things, I rebuilt
the SPARC5 that they used for burning CD-ROMs.

> That's good for us, because at geostationary orbit, you can only see down
> to about 80 degrees south. With the drift, you can see the poles for
> about 6 hours a day.

Yep... for the rest of the audience, the satellite comms at McMurdo (78S)
use a dish that's only pointed a few degrees above parallel with the
earth... they had to excavate in front of the disk so it could tip that
far down - the stand was designed for temperate latitudes.

> (usually the sun). If you were in the 1970s and wanted to design a
> reliable "portable" computing system for each launch site required around
> the world, what would you use? You guessed it, a PDP-11. The software
> was on an RX02 along with RT-11...

I would love to help you with your work, but I'm not sure how. I do not
own a Qbus SCSI controller, but I have programmed under RT-11
professionally (as have others here) and I do have a pile of Qbus stuff
(as do others here). I'll drop you a note off-line.

-ethan




__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com
Received on Thu Feb 28 2002 - 01:17:45 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:49 BST