> > >Perhaps you should do a low level reformat and bad block scan of the
>> >disk? You know the magic words to invoke the controller setup?
>> That would probably be a good idea.
>[...]
>> I don't know anything about it's setup.
>INIT (via RESTART button)
>Then type into the boot prom:
>D/P/L 20088004 80000001 <cr>
>D/P/W 20001f40 20 <cr>
>D/P/W 2000146a 3FFF <cr>
>S 200 <CR> (or "S 218 <cr>" if you have GPX graphics)
>and you will see the adapter menu setup. Reformat the disks, do a bad
>block scan and revector the bad blocks from the errorlog.
Thanks for the info. I just hooked my VT220 up to it and
booted it for the first time since moving it and it came right up
just fine. In fact, this was the first time using it with this
particular terminal as well. Once I get the DELQA I'll swap out the
hard drive and install the DELQA and see what happens.
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
Received on Sun Jan 06 2002 - 15:49:15 GMT