> -----Original Message-----
> From: Tothwolf [mailto:tothwolf_at_concentric.net]
> Sent: 08 January 2002 12:23
> To: classiccmp_at_classiccmp.org
> Subject: Re: Back to board washing for a moment
>
> Make sure you properly discharge the CRT and other caps in
> the HV section
> before disconnecting the anode lead from the CRT. You can
> find some basic
> service and safety information on the sci.electronics.repair
> FAQ located
> here: http://www.repairfaq.org/
Thanks for that; the board's been out of the chassis for over a week now;
I've just been trying to find time to clean it up.
If the flyback is suffering from bad soldering could that itself cause
stress in other components and thus the smoke? It won't take long to
resolder everything since it's not a very big board.....
cheers
--
Adrian Graham, Corporate Microsystems Ltd
e: adrian.graham_at_corporatemicrosystems.com
w: www.corporatemicrosystems.com
w2: www.binarydinosaurs.co.uk (Online Computer Museum)
Received on Tue Jan 08 2002 - 08:39:02 GMT