re-keying an RS/6000 lock?

From: Fred Cisin <cisin_at_xenosoft.com>
Date: Mon Jun 3 12:16:22 2002

On Mon, 3 Jun 2002, Chad Fernandez wrote:
> Looks like it's in the "normal" position. I can open the case and get
> to the whole locking mechanism. Can I take it apart and change it, so I
> can use my key? I'd try it, but I though that before I end up with a
> bunch of little parts falling all over the place I'd ask first :-)

1. Does the key that you want to rekey it to fit the keyway?
Changing a lock to use a different keyway requires some sophisticated
milling.

2. Does the lock use pin tumblers or wafers?
Wafer locks can usually be disassembled/reassembled without special tools.
For pin tumbler locks, you'll probably want a plug follower of the right
diameter (hint: look at drill bit shanks as an easy source of various
diameters)

If you can remove the lock completely, then you have the option of handing
the entire task oer to a locksmith, who has experience doing it. It
usually isn't very expensive.

The hard part with most "cam locks" is getting the cam off and back on,
since they are often designed without an intent of later servicing.
Received on Mon Jun 03 2002 - 12:16:22 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:04 BST