--- Tony Duell <ard_at_p850ug1.demon.co.uk> wrote:
> >
> >
> > --- Tony Duell <ard_at_p850ug1.demon.co.uk> wrote:
> > > Oh, what the heck, I've dug mine out and pulled the PSU...
> >
> > Nope. Not the same at all. I have three identical units, but no
> fuses.
>
> I am suprised. Are you sure there's not a soldered-in fuse (which might
> look more like a resistor)?
None. I know what pico fuses look like. There is nothing anywhere
on these boards that resembles a fuse. I would expect one, too.
There isn't one.
> > > Anyway, on my PCB there's a 120k resistor (looks to be about 0.5W,
> > > running parallel to the long edge of the PCB...
I can't find anything that closely resembles that. There is a largish
3K ceramic resistor next to the 470uF caps... it's good in all three
PSUs.
> > > My PSU is made by 'Joule Power', apparently.
> I've put my box away again. I couldn't see an obvious model number on the
> PSU board last night, but if you do post the numbers on yours I can dig
> my unit out again and see if I can match them at all.
On the back side, in copper, mine says...
JOULE POWER inc
107-001-027
and elsewhere it says, in copper
LCT60
and in ink
LCT60-1202
and on the top, in ink
802256101 rev c1
Good news is I found *another one*. This one (TK50) might have a working
supply. Have to check it out later.
-ethan
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
Received on Thu Jun 13 2002 - 00:54:09 BST