I suspect the framebuffer is not compatible.
I have an xf86config file that works graphics on the vre01
But on the 3100/76 and on the vt1200 the vre01 works in b/w and with
the on-board framebuffer. Does the 4000/60 have similar output???? I
should go ck myself as I have one of those...
Fred
-----Original Message-----
From: cctalk-admin_at_classiccmp.org [mailto:cctalk-admin_at_classiccmp.org]
On Behalf Of Bill Bradford
Sent: Saturday, 15 June, 2002 22.17
To: classiccmp_at_classiccmp.org
Subject: VS4000/60 and VRE01 problems
Anybody had luck hooking a VAXstation 4000/60 with "GS-2" (?)
graphics adapter up to a VRE01 flatpanel?
I finally got the VS4K from Doc today (thanks for dropping it off,
BTW, hope that mono video cable works for you), and got around to
hooking it up to the VRE a bit ago. However, all is not right - there
looks to be a scan rate/resolution mismatch, and I cant find ANY
dipswitches, etc, to set..
Suggestions? Links to the 4000/60 owners manual possibly?
I've got pictures of the results:
http://gallery.mrbill.net/view_album.php?set_albumName=vre01&page=2
Any help appreciated. I'd LOVE to get this display working..
(and the pictures show the display as yellow - its actually orange..)
Bill
--
Bill Bradford
mrbill_at_mrbill.net
Austin, TX
Received on Sun Jun 16 2002 - 10:42:35 BST