NetBSD Boot tape for MVII

From: Messick, Gary <Gary.Messick_at_itt.com>
Date: Wed Mar 13 12:32:28 2002

> -----Original Message-----
> From: Ethan Dicks [mailto:erd_6502_at_yahoo.com]
> Sent: Wednesday, March 13, 2002 1:04 PM
> To: classiccmp_at_classiccmp.org
> Subject: Re: NetBSD Boot tape for MVII
>
> <snip>
>
> It's possible to load a bootstrap and hang when the real
> software kicks
> in. I am debugging an H-11 that has an H-27 floppy interface
> that won't
> work in the chain but will let me load the bootstrap if I put
> it behind
> everything else with a gap (it seems to not let go of some Qbus signal
> and when it's properly installed, I never get an ODT prompt).
>
> I don't know the particulars of the box you have, but BA23s have 3 CD
> slots, not 4.
>
> -ethan

Ethan,

I figured you had already fixed your H-11, H-27 problem. I did some
digging, and I do have the schematics (C size drawing) and the operation
manual w/the theory of operation section. Contact me off-list and I'll get
a copy to you.

Gary

************************************
If this email is not intended for you, or you are not responsible for the
delivery of this message to the addressee, please note that this message may
contain ITT Privileged/Proprietary Information. In such a case, you may not
copy or deliver this message to anyone. You should destroy this message and
kindly notify the sender by reply email. Information contained in this
message that does not relate to the business of ITT is neither endorsed by
nor attributable to ITT.
************************************
Received on Wed Mar 13 2002 - 12:32:28 GMT