1541 cables (Was: VIC-20 stuff available)

From: Christopher Smith <csmith_at_amdocs.com>
Date: Fri May 24 15:53:36 2002

> -----Original Message-----
> From: Gary Hildebrand [mailto:ghldbrd_at_ccp.com]

> BTW, the standard MIDI cables are DIN-5, with pin 3 (middle one) as
> shield/ground, pins 4&5 are a current loop to the LED in the
> opto-isolators. I just bought a handful of DIN-5 plugs from
> Mouser and
> used shielded audio pair. I'd use god mic cable if you need something
> more rugged.

I might try making some drive cables up -- I have three 1541 drives
(I think three...) setting in the basement doing nothing. A shame
when they could be attached to a commodore which is also doing nothing
at the moment ;)

Chris


Christopher Smith, Perl Developer
Amdocs - Champaign, IL

/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
 
-------------- next part --------------
-------------------------------------------------------------------------------------

The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated recipient(s)
of the message. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, use, distribution or copying of
this communication is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify us immediately
by replying to the message and deleting it from your computer.
Thank you.

-------------------------------------------------------------------------------------
Received on Fri May 24 2002 - 15:53:36 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:18 BST