AIM-65 displays

From: M H Stein <mhstein_at_canada.com>
Date: Wed May 1 18:43:16 2002

>From: Ethan Dicks <erd_6502_at_yahoo.com>

>Would you have 10-12 DL1416s? That would give me enough for two
>display boards and a spare or two for the future.
---
Hmm.. probably not. I do have about a dozen, but I might need some of 
them for my AIMs if & when I finally get around to looking at them. 
Also, I doubt that there are even five matching ones; some are Siemens
and some are Litronix/NSL, with different profiles, and they are also
various brightness codes. But if you need a replacement or two I could
probably help out.
But from the other perspective, what were you planning to use? And
do you know of a source for a cheap 1x20 parallel VF or LCD display?
Lots of 2&4x20s; guess one of those would do...
---
>Right now, my "spare" time is all focused on displays anyway - the
>LCDProc project (http://lcdproc.omnipotent.net/) is closing in on
>a new point release and I'm trying to debug a development environment
>to be able to add support for some new display hardware (PD3000 "pole
>displays" like you see attached to cash registers/tills).
---
Looks like there are a few of these display/monitor projects out there;
what's so different about the PD3000? Aren't they all RS-232?
I'll be in touch off-list when I know more.
mike
Received on Wed May 01 2002 - 18:43:16 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:19 BST