Open firmware/Power Mac 7200/75

From: Christopher Smith <csmith_at_amdocs.com>
Date: Fri May 3 16:40:27 2002

Ok guys, so there was a problem in the terminal settings. (Hey,
it's an IBM 3151(?) terminal, and mostly configures in Swahili)

Open firmware does, indeed, work on this system. Don't ask why
it didn't work earlier with the Wyse (which was set up properly,
I'm sure, since it's in use on the machine which I used to finally
get the IBM configured properly ;).

Anyway, it will now boot into Open Firmware, even without keyboard,
monitor, etc, attached. I'll attempt to install Darwin on the disk
sometime soon. It may work, but at the moment, it has less RAM and
less disk than they say is "required."

Chris

Christopher Smith, Perl Developer
Amdocs - Champaign, IL

/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
 
-------------- next part --------------
-------------------------------------------------------------------------------------

The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated recipient(s)
of the message. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, use, distribution or copying of
this communication is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify us immediately
by replying to the message and deleting it from your computer.
Thank you.

-------------------------------------------------------------------------------------
Received on Fri May 03 2002 - 16:40:27 BST