2708 Programming Algorithm?

From: Richard Erlacher <edick_at_idcomm.com>
Date: Mon May 6 14:56:45 2002

CAREFUL NOW ...

I'm pretty sure that this is incorrect, and if you do that, you may damage the
parts involved. I did, an hour or so ago, post a URL to the 2708 datasheet.
However, I've not run into the 8748 evaluation board sheet that describes,
among other things, the 8708 as being a 5-volt-only version of the 2708.
Since it was a half-2716, it programmed like a 2716. That's not so important,
though, since the inquiry was about the 2708.

Dick

----- Original Message -----
From: "Dwight K. Elvey" <dwightk.elvey_at_amd.com>
To: <classiccmp_at_classiccmp.org>
Sent: Monday, May 06, 2002 1:19 PM
Subject: Re: 2708 Programming Algorithm?


>
> >X-Server-Uuid: 1b77f47c-118c-11d5-bbc5-0002a5132c3d
> >X-Authentication-Warning: ns2.ezwind.net: majordom set sender to
> owner-classiccmp_at_classiccmp.org using -f
> >X-Sender: rigdonj_at_pop-server.cfl.rr.com
> >Date: Mon, 06 May 2002 15:29:52
> >To: classiccmp_at_classiccmp.org
> >From: Joe <rigdonj_at_cfl.rr.com>
> >Subject: Re: 2708 Programming Algorithm?
> >MIME-Version: 1.0
> >X-WSS-ID: 10C80D742279406-01-02
> >Content-Transfer-Encoding: 7bit
> >
> >Steve,
> >
> > I don't have the programming instructions for the 2708 but I do have
them
> for the intel 8708 and intels later manuals state that they're the same.
Here's
> what I have in the sept 1975 8080 Microcomputer Systems User's manual.
> >
>
> Hi
> I believe the main difference between the 2708 and 8708 is that
> the 8708 could handle negative levels on the data bus so it
> could be connected directly to the 8080's data bus.
> Dwight
>
>
>
Received on Mon May 06 2002 - 14:56:45 BST