>John Allain wrote:
> > It is a disk controller for MFM disks and a floppy drive. There was
> > an RQDX1, RQDX2, and RQDX3. Each supported diffferent models
> I was lucky enough to find an RQDX3 for a fair price recently, however
> it didn't come with the top cable. If someone could point me to where
> there is ribbon construction information (where to split, where to place
> the pin 1's etc.) that would be most useful, thanks.
Jerome Fine replies:
Just a standard 50 pin cable with a male 50 pin header at both ends.
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
Received on Sun May 12 2002 - 14:04:58 BST