>About to scream trying to find docs on a Heath/Zenith video card... It's an
>8-bit ISA board with both a 9 pin and 15 pin video interface, and the
>confounded row o' dip switches... The part number on the board is 150-307...
>Hope someone can help me! BTW I am trying to make it use the 15-pin port
>(VGA)
I have one made by Video Seven that I believe I pulled from a 386 Zenith
PC. The part numbers aren't the same as yours, so the dip settings
probably aren't the same (but in case you care 1 closed, 2-6 open).
I also don't have docs, (nor were able to find them), but with mine, it
auto selects the VGA or CGA based on which has a monitor plugged in. If
both have a monitor, it uses VGA (I wasn't able to get it to work with
both at the same time... maybe if I had docs and knew what the dips did).
The interesting thing with mine is it is one of the few cards I have with
a "Slot 8" jumper, which if I understand it right, was to let you use it
in an XT that had slot 8 reverse wired (or something to that effect).
-chris
<
http://www.mythtech.net>
Received on Wed Nov 20 2002 - 18:58:00 GMT