I think so. I have vague recollections of these cards, along with the
Corvus drives. The red molex connector on the left is the network
connector. Why they put it on that end, instead of where it might hang out
the slots only Corvus knows. It's a three wire connector, but I don't
remember if it's half duplex balanced pair, or full duplex single ended.
--John
-----Original Message-----
From: cctalk-admin_at_classiccmp.org [mailto:cctalk-admin_at_classiccmp.org]On
Behalf Of Fred Cisin (XenoSoft)
Sent: Thursday, October 17, 2002 14:57
To: cctalk_at_classiccmp.org
Subject: RE: What is this?
On Thu, 17 Oct 2002, J.C. Wren wrote:
> It seems to be a Corvus Omninet Transporter Network Card. Google turned
up
> 42 hits, 2 of which were this question previously asked on this list. It
> wants to talk to a Corvus shareable drive of some sort. Don't know what
> protocol it uses, but I'd expect it to be RS-485 or some other balanced
pair
> type media.
Sounds reasonable; but are the connectors on the card consistent with that
hypothesis?
Received on Thu Oct 17 2002 - 14:10:01 BST
This archive was generated by hypermail 2.3.0
: Fri Oct 10 2014 - 23:35:34 BST