You might try any of the HP1000 support companies such as crisis
computer, MBC Inc, etc.
Some of these cables are very common, and they might actually be
affordable. In some cases these companies might really need some I/O
board you have no use for, and swap the cable you need for
the part they need.
Its worth a try.
Glen Slick wrote:
> I think the necessary connector is a dual row 48 contact 0.156"
> spacing card edge connector. I'll have to see if I can find a
> source. I think some place like http://www.edac.net would let you
> specify such a connector, but actually buying some in low quantities
> might be a different story.
>
> -Glen
>
>
>> From: "Will Jennings" <xds_sigma7_at_hotmail.com>
>> Reply-To: cctalk_at_classiccmp.org
>> To: cctalk_at_classiccmp.org
>> Subject: Re: HP 2647A / F Terminal & HP1000
>> Date: Wed, 23 Oct 2002 10:52:43 -0600
>>
>> Closest I ever came to cables was the hacked-off ends as gold scrap : (
>>
>> Will J
>
>
>
> _________________________________________________________________
> Surf the Web without missing calls! Get MSN Broadband.
> http://resourcecenter.msn.com/access/plans/freeactivation.asp
>
>
Received on Wed Oct 23 2002 - 16:21:00 BST