[OT?] Supra FaxModem

From: Voyager <voyager_at_hol.gr>
Date: Sat Oct 26 03:44:00 2002

There were a few pages with the AT commands. I need to have the S registers
at least, for example what bits in what register must be se to change the 2
digit display, or activate the assymetrix transmition etc.

Would it be easy to scan it for me?

I was almost sure that I had saved all the files from Supra (then Diamond)
site, but I could not find it anyplace :(



----- Original Message -----
From: "Tothwolf" <tothwolf_at_concentric.net>
To: <cctalk_at_classiccmp.org>
Sent: Saturday, October 26, 2002 4:13 AM
Subject: Re: [OT?] Supra FaxModem


> On Fri, 25 Oct 2002, Voyager wrote:
>
> > I have an external 28.8 Supra FAX modem, the one with the 2 digit green
> > LED display. It's never flashed, and contains one of the very early
> > firmware versions. I recall that Supra had an extensive file list
> > (including manuals in PDFs) for downloading at supra's site, then moved
> > to Diamond, then nothing, they vanished.
>
> Diamond has done away with lots of things, including support/info for many
> of the early products that "made" Diamond.
>
> I think I still have the book for the Supra 28.8 if there is something you
> are looking for in particular.
>
> > Could anybody help me locate a mirror of these files? I need the flash
> > files to upgrade it up to 33.6 version (needs several consecutive
> > flashes) and the AT command set that supported (the non standard
> > commands).
>
> If you find the files, let me know too. I also have some of these
> modems...
>
> -Toth
>
>
Received on Sat Oct 26 2002 - 03:44:00 BST