On Sun, 27 Oct 2002, Voyager wrote:
> But, could you please check, if there is an S register for the 2 digit
> display? could you please send me the options? I am 99% confident that
> it's not in the quick reference sheet.
I don't see one that directly sets the display. According to the manual,
S37 can set the line speed, but N0 has to also be given to enable it.
There is another command called +MS that sets other speed settings, but it
has tons of options.
Diamond has this manual linked from their website, but it appears to be
for a later modem:
ftp://ftp.diamondmm.com/pub/communications/supra/288VPC.pdf
This file appears to cover most all of the AT commands and S register
options for the SupraFAXModem 288:
ftp://ftp.diamondmm.com/pub/communications/supra/flashers_current/v34/336_list.txt
It looks like most of the modems are still listed here:
http://www.diamondmm.com/support/diamond/default.asp?menu=support&submenu=Legacy_Modems
It also looks like most of the flash ROM versions can be found here:
ftp://ftp.diamondmm.com/pub/communications/supra/
Btw, the book I have covers both the 14.4 and 28.8 modems, while the quick
reference sheet only covers 28.8 modems.
Do you know offhand if the 14.4 modems can be flash upgraded in the same
manner as the 28.8s? It certainly appears as though Supra was trying to
prevent their modems from becoming obsolete due to protocol and speed
improvements. These remind me of the US Robotics Courier modems.
-Toth
Received on Sun Oct 27 2002 - 04:19:00 GMT