Hi,
> > curious. Mine's definitely a Diablo unit and plugs into its own
> > card within the
>
> Yes, a Diablo Hitype II.
ha ha - just me being stoopid :)
> > cardcage in the system unit. But there's also a seperate card
> > in there (oddly,
>
> How many wires in the cable between the printer and this card?
right, just taken another look...
yes, it is 50 pins - but not connected to anything; the printer connects via a
serial cable to a seperate SIO board (which seems capable of supporting 2
devices). A post-sale upgrade I assume, but they left the original Diablo board
in the machine too. The SIO board has DIP-switches on it whereas configuration
on the other cards seems to be solder-contact only.
do you remember if your unit shows anything on the display prior to putting the
system disc in? Be useful if it did in terms of tracing the fault with this
machine.
there's more cards in the cardcage than I originally remembered:
disc #4 drive (x 2)
disc #4 read/write
disc #4 control
64K ram
SIO interface
3 mode VDU output
3 mode VDU counter
VDU memory
CPU #9
Z80 RTC
keyboard interface
diablo interface
The 3 VDU boards are coupled on the outer edge as well as on the backplane.
Backplane connections are via 88 contacts, with the component-side of the cards
being purely ground. Not sure if the layout was to any recognised design;
probably proprietary though.
cheers,
Jules
88
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
Received on Tue Oct 29 2002 - 05:32:00 GMT