IBM Aptiva for parts

From: Robert F. Schaefer <rschaefe_at_gcfn.org>
Date: Wed Sep 4 19:40:01 2002

Move-out week is over on campus, but I decided hit a couple of alleys on the
way home anyway. The only thing of interest I found was a skinless,
stripped Aptiva that I nearly passed up, but then I noticed that the slots
were on an active riser card so I picked it up anyway. The power supply has
some extra wires on it, too. I figure these are odd enough to be hard to
replace if you get a bad one. If anyone wants the parts for $postage, let
me know. I've got:

motherboard, FRU 11H8440
    no CPU, no RAM, no cache, video RAM upgrade not installed, has a jumper
board installed in the VRM slot

`7x6 riser', FRU 11H8453
    6 ISA, 2 PCI (1 shared), has some active components on it

power supply, FRU 06H2973, P/N 06H2971
    has 3.3V, and an extra connector, keyed 3 pin with a latch, 22GA black,
white, & red

modem/sound card, 42H1970
    ISA, Mwave `MC27802C JSW/JBR', `MD-2780/I1', `GVC-KD070101', has a
little 2-conductor cable that attached to the motherboard (not CD audio)

Bob
Received on Wed Sep 04 2002 - 19:40:01 BST