An S-100 Power Plug - Please?!

From: John Allain <allain_at_panix.com>
Date: Wed Sep 18 16:11:00 2002

One solution for making a power plug that I have never been
desperate enough to use (I have a cord with two insulated
alligator clips on the end for temporary --and very careful--
application) is to go to a model or large art store where
they sell very narrow metal tubes (2mm to 8mm+ OD).
Then:
   force the tube over the prong.
   cut to length
   solder and shrink-wrap to power cord.
   epoxy the pins to the right distance apart.

This I might test very carefully as well.
Not for construction by minors, etc.

John A.
Received on Wed Sep 18 2002 - 16:11:00 BST